Call our friendly staff

01706 659703

Pennine Omega Lattice Top Panels

From £29.00
inc. VAT

An elegant European timber garden fence panel with a wave shaped trellis, available in the following sizes: Read more

SizePrice
180 x 180 cm
(5 ft 11" w x side ht 160 cm / 5ft 3”; max ht 5ft 11”)
RRP £55.35 Was £42.75
Now £40.75 inc Vat
180 x 150 cm
(5 ft 11" x side ht 130 cm / 4ft 3”; max ht 4ft 11”)
RRP £50.25 Was £37.55
Now £35.55 inc Vat
180 x 120 cm
(5 ft 11" w x side ht 100 cm / 3ft 3”; max ht 3ft 11”)
RRP £47.25 Was £33.50
Now £31.50 inc Vat
180 x 90 cm
(5 ft 11" w x side ht 70 cm / 2ft 3"; max ht 2ft 11")
RRP £41.85 Was £31.00
Now £29.00 inc Vat

Width extenders included free of charge if requested at time of ordering - saving of up to £3.00 / panel. Panels reduced by £2.00 for October only.

Description

This is a very popular elegant continental fence panel. The dual faced nature of this panel makes it a perfect panel for shared neighbour boundaries, as it can be appreciated equally from both sides.

It provides a striking boundary to any garden, offering a high degree of privacy, whilst the stunning wave style diamond trellis adds to the impact and elegant look. It is pressure treated for an enhanced look and for greater durability.

Timber is a natural product which may crack, split, discolour or expand and does not detract from the quality of the product supplied.

Pennine Omega Lattice Top Panels

Specification

The Pennine Omega Lattice Top Panel is constructed from:-

  • 9mm x 95mm Horizontal panel slats planed to a ribbed effect
  • All slats are screwed to the 3 planed internal battens
  • 45mm x 45mm framing kiln dried to <24%
  • Tenon and Mortise Joints to framing
  • Lattice 12mm x 30mm Planed and Rounded Edges. Inside gap 50mm
  • Stainless steel screws and fixing used
  • Pressure treated light green to class 3 for longer life
  • Note: If using this panel with existing post set 6ft apart or in combination with a 6ft gravel board / base you will need to attach panel width extenders to each panel side to convert from metric 1.8 to imperial 6ft.  These will be included free of charge if requested at order placement (£1.50 inc Vat each at other times).

Measurements

Please note that the Continental Panel height measurement refers to the highest point. On curved top designs like the Pennine Omega Lattice Top, this is to the centre point.

For example, a 180cm high panel is only 160cm tall at the left and right edges. The curvature of the top extends a further 20cm beyond this, to a total height of 180cm.

Note: If using this panel with existing post set 6ft apart or in combination with a 6ft gravel board / base you will need to attach panel width extenders to each panel side to convert from metric 1.8 to imperial 6ft.  These will be included free of charge if requested at order placement (£1.50 inc Vat each at other times).

Pennine Omega Lattice Top Panels

Get a Shipping Quote

Pennine Omega Lattice Top Panels

Pennine Omega Lattice Top Panels

We deliver throughout the UK. To get an estimate for delivery, select the size and quantity of products you need and click "Add to Quote".

You can keep adding products until you have everything you need, and then request a quote for delivery from the Shipping Quote page.

You might also need...

Pennine Fencing is renowned for low prices and well-stocked high quality products. We have everything you need to complete the perfect job. Below is a list of items we think you may find useful complements to Pennine Omega Lattice Top Panels.